19
USBCloner The Burn tool Quick Guide
USBCloner The Burn tool Quick Guide
Copyright® 2005-2015 Ingenic Semiconductor Co., Ltd. All rights reserved.
(the frequency range used only to burner configuration, uboot frequency range is not discussed).
Specific
methods
of
checking
and
modifying
the
configuration,
please
refer
to
the Guide for using the Burn tool.
5.6 Progress appears as failed Boot stage 50%, 70%, 75%
If the main screen displays the progress bar turns red and the progress to 50% or 70% or
75% .Then check the DDR configuration.If DDR configurations are correct, then check the USBcloner
operating environment whether an identified USB virtual machine.
5.7 Progress appears as failed Boot stage 85%
If
the
main
screen
displays
the
progress
bar
turns
red
and
the
progress
to
85%. Please confirm whether the burned media is NAND.
If you are NAND, check current NAND type is configured in the Burntool, if you have
already configured, please check its parameters arecorrect.
Some of the parameters are incorrect please check NAND partition isconfigured correctly.
Specific
methods
of
checking
and
modifying
the
configuration,
pleaserefer
to
the Guide for using the Burn tool.
5.8 Progress appears as failed Boot stage 100%
，
But burning files by 0%
When using a burning tool to burn, if the progress bar is displayed on the main interface to 100%, but
the progress bar shows image file is 0%and displayed on the progress bar "INIT_FAILED". At this time,
was sure to check burn file path configuration is correct, the path here refers to the PC directory and file
name are correct.
5.9
Other errors
Use the Burn tool, if you meet the above does not mention the error or the error according to the above
method is not resolved, you can contact our technical support staff at any time.
Содержание USBCloner
Страница 1: ...Ingenic USBCloner The Burn tool Quick Guide Date July 2017...
Страница 4: ......
