14
S E R I A L P O R T
From the Configuration Menu select
Serial Port
D I S P L A Y C A L I B R A T I O N
This selection defines the communications on the
serial port. Select PC if remote control and display
is desired. Select USB for the optional USB data
collection.
Note: contact IRI for information on the software
required for PC control.
The analyzer returns to the Measurement Mode
Screen after the selection is made.
From the Configuration Menu select
Display
Calibration
.
LCD Touch Screen Calibration; follow the
instructions on the screen. Touch the X on the lower
left side, then on the upper right side.
Configuration Menu
Serial Port
Solenoid Control
Display Calibration
Touch X
X
Configuration Menu
Solenoid Control
Display Calibration
