Infotrend EonStor DS B Series страница 43 Скачать руководство пользователя

Страница: 43 / 157

EonStor DS B12/B24 Series

Installing the Hard Drive Tray into the Enclosure

Once the hard drives have been installed in the drive trays, install the drive trays into

the system.

WARNING

Each drive bay must be populated with a tray even if it does not contain a hard drive.

With a bay empty, ventilation will be disrupted and the system will overheat.

With the hard drive tray bezel opened, align and insert the tray into the enclosure.

Once fully inserted, close the tray and use a small-size flat blade screwdriver to turn

the bezel lock from unlock to the lock position.

Содержание EonStor DS B Series






























































































































































Результаты поиска

Содержание EonStor DS B Series

Отзывы:

Похожие инструкции для EonStor DS B Series

Бренды по названию

Популярные бренды

Infotrend EonStor DS B Series, Руководство по оборудованию

Результаты поиска

Содержание EonStor DS B Series

Отзывы:

Похожие инструкции для EonStor DS B Series

Бренды по названию

Популярные бренды