Infotec ISC 615 G Скачать руководство пользователя страница 97

Страница: 97 / 134

Handling Print Cartridges

Replacing Print Cartridges

Use the following procedure to replace print cartridges.

Note

❒

Be sure to check the colour before inserting the print cartridges so as not to
replace the wrong colour.

❒

If, after replacing the print cartridge, add ink messages continue to appear,
turn off the machine's power, and then turn it back on again.

❒

Open print cartridge during the validity period stated on their packaging.

❒

Do not open the print cartridge pack immediately before replacement.

❒

Do not touch the ink jet area of the print cartridge.

❒

Do not shake the print cartridge. Doing so can result in leakage.

❒

Do not disassemble the print cartridge.

❒

Do not turn off the power during the replacement procedure and do not dis-
connect the power plug from the wall outlet.

❒

Once it is inserted, do not remove the print cartridge unless necessary.

❒

Do not remove or tamper with the print cartridges during printing. This will
cause printing to stop.

AMI001S

Содержание ISC 615 G






































































































































Результаты поиска

Содержание ISC 615 G

Отзывы:

Похожие инструкции для ISC 615 G

Бренды по названию

Популярные бренды

Infotec ISC 615 G, Руководство по эксплуатации

Результаты поиска

Содержание ISC 615 G

Отзывы:

Похожие инструкции для ISC 615 G

Бренды по названию

Популярные бренды