Infotec ISC 615 G Скачать руководство пользователя страница 125

Страница: 125 / 134

119

8. Remarks

This chapter describes how to maintain and operate the machine.

Where to Put Your Machine

This section provides precautions for installation, movement and disposal.

Machine Environment

Choose your machine's location carefully.
Environmental conditions greatly affect its performance.

Optimum Environmental Conditions

The following describes precautions when moving the machine.

CAUTION:

• Temperature: 10-32

C (50-89.6

F) (humidity to be 54% at 32

C, 89.6

• Humidity: 15-80% (temperature to be 27

C, 80.6

F at 80%)

• A strong and level base.
• The machine must be level within 5 mm, 0.2 inches: both front to rear and left

to right.

• To avoid possible buildup of ozone, make sure to locate this machine in a

large well ventilated room that has an air turnover of more than 30
m

/hr/person.

•

Keep the machine away from humidity and dust. Otherwise a fire or an elec-
tric shock might occur.

•

Do not place the machine on an unstable or tilted surface. If it topples over,
an injury might occur.

•

After you move the machine, use the caster fixture to fix it in place. Other-
wise the machine might move or come down to cause an injury.

Содержание ISC 615 G






































































































































Результаты поиска

Содержание ISC 615 G

Отзывы:

Похожие инструкции для ISC 615 G

Бренды по названию

Популярные бренды

Infotec ISC 615 G, Руководство по эксплуатации

Результаты поиска

Содержание ISC 615 G

Отзывы:

Похожие инструкции для ISC 615 G

Бренды по названию

Популярные бренды