INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - [email protected] – 07 19 AA 36 205 09
24
Fault code
F19
Over temperature
1. Shut down the UPS. Restart the UPS to Check the
fan for operation and if the ventilation hole has been
covered
2. Contact Technical Support.
Other
Software is
inactive
The serial is not
connected.
Connect the serial cable to the UPS unit and an open
serial port on the back of the computer. You must use
the cable that came with the unit.
The unit is not providing
battery power.
Shutdown your computer and turn the UPS off. Wait 10
seconds and turn the UPS back on. This should reset
the unit.
5 . S T O R A G E A N D M A I N T E N A N C E
5.1 Warning indicator
The UPS system contains no user-serviceable parts. If the battery service life (3~5 years at
25°C ambient temperature) has been exceeded, the batteries must be replaced. In this
case, please contact your dealer.
5.2 Storage
Before storing, charge the UPS 5 hours. Store the UPS covered and upright in a cool, dry
location. During storage, recharge the battery in accordance with the following table:
Storage Temperature
Recharge Frequency
Charging Duration
-25°C - 40°C
Every 3 months
1-2 hours
40°C - 45°C
Every 2 months
1-2 hours
6 . A V A I L A B L E O P T I O N S
Here are the options available :
Designation
Ref.
SNMP communication card
61812
SNMP vm Minislot card (Virtual environment)
61142
Kit Rack E3 Live 500-1500 RM
61810
Dry contact card AS 400
61809
