28
6.9 Trigger Command Generating and Cancelling
1. The FV10X code reader can respond to the command to control the device to read the
code. The default trigger command (hex) of the code reader is "544F4E", and the trigger
cancellation command (hex) is "544F4646"
2. Set the trigger command, for example, set "LON" as the trigger command, select
"Transformation Assistant", and input "LON" to convert "LON" to the corresponding
hexadecimal;
3.Copy the Hex content converted by "LON", paste it into "Enable trigger command", click
"OK", you can view it in the setting list, click "Download Configuration" to complete the
setting;
The custom trigger cancellation command is set as above.
