Infortrend EonStor GSe Pro 3000 Series Скачать руководство пользователя страница 2

Страница: 2 / 124

Legal Information

Legal Information

All Infortrend products, including the product customers have purchased from

Infortrend, shall be subject to the latest Standard Warranty Policy available on the

Infortrend website:

http://www.infortrend.com/global/Support/Warranty

Infortrend may from time to time modify, update or upgrade the software, firmware or

any accompanying user documentation without any prior notice. Infortrend will

provide access to these new software, firmware or documentation releases from

certain download sections of our website or through our service partners. Customer

shall be responsible for maintaining updated version of the software, firmware or

other documentation by downloading or obtaining from Infortrend, and installing

designated updated code, including but not limited to firmware, microcode, basic

input/out system code, utility programs, device drivers, and diagnostics delivered

with Infortrend product.

Before installing any software, applications or components provided by a third party,

customer should ensure that they are compatible and interoperable with Infortrend

product by checking in advance with Infortrend. Customer is solely responsible for

ensuring the compatibility and interoperability of the third party’s products with

Infortrend product. Customer is further solely responsible for ensuring its systems,

software, and data are adequately backed up as a precaution against possible

failures, alternation, or loss.

For any questions of hardware/ software compatibility, and the update/ upgrade code,

customer should contact Infortrend sales representative or technical support for

assistance.

To the extent permitted by applicable laws, Infortrend shall NOT be responsible for

any interoperability or compatibility issues that may arise when (1) products, software,

or options not certified and supported by Infortrend are used; (2) configurations not

certified and supported by Infortrend are used; (3) parts intended for one system are

installed in another system of different make or model.

Содержание EonStor GSe Pro 3000 Series





























































































































Результаты поиска

Содержание EonStor GSe Pro 3000 Series

Отзывы:

Похожие инструкции для EonStor GSe Pro 3000 Series

Бренды по названию

Популярные бренды

Infortrend EonStor GSe Pro 3000 Series, Руководство по оборудованию

Результаты поиска

Содержание EonStor GSe Pro 3000 Series

Отзывы:

Похожие инструкции для EonStor GSe Pro 3000 Series

Бренды по названию

Популярные бренды