Infortrend EonStor GSa 3000 Скачать руководство пользователя страница 46

Страница: 46 / 97

2-22

Chapter 2: Hardware installation

IMPORTANT!

•

We suggest you to use an enclosure-specific spare drive to prevent it from participating in the

rebuild of a logical drive on another enclosure. You can refer to the ID tags on the host links to see

the related LUN mapping and cable links routing paths.

•

You need MPIO driver to manage the access via two different HBA ports. This driver communicates

with the system firmware and performs load balance and automated distribution of I/O.

2.3.3 SAS - host connections

This section details about the connections between SAS and host using SAS cables. The SAS cables (8

pairs of 28 mm AWG) are characterized by the following:
•

100 Ohms

•

Black color

•

UL-approved, lead free 50 cm, 120 cm, or 170 cm in length

•

Connectors must be secured to the receptacle of the chassis using a latching mechanism

WARNING!

The SAS cables are sensitive and must be handled with care. To prevent interference

within the rackmount, the cable routing path must be carefully planned and the cables must not be bent.

Содержание EonStor GSa 3000


































































































Результаты поиска

Содержание EonStor GSa 3000

Отзывы:

Похожие инструкции для EonStor GSa 3000

Бренды по названию

Популярные бренды

Infortrend EonStor GSa 3000, Руководство по оборудованию

Результаты поиска

Содержание EonStor GSa 3000

Отзывы:

Похожие инструкции для EonStor GSa 3000

Бренды по названию

Популярные бренды