2-15
EonStor GSa 3000 Series Hardware Manual
2.3.2 Fibre-Host connections
The Fibre Channel standard allows optical connections. The optical cables are used over long distances
and have been proven to be more reliable. Due to the demands of high transfer rates, optical cables are
preferred for a 4 Gbps, 8 Gbps, or 16 Gbps fiber connectivity, as they are not vulnerable to EMI.
The fibre host ports are connected to fibre channel host adapters (HBA) that feature SFP interface with
full duplex transfer support in a PCIe interface. For the latest certified items, contact the vendor near
you.
WARNING!
•
All fibre cables are sensitive and must be handled with care. To avoid interference, the cabling path
must be carefully planned without the cables getting bent.
• Lasers are hazardous and may cause blindness or permanent eye damage. Use them with utmost
caution. Never look directly when lasers are turned on or operating.
Detecting auto speed
Speed auto-detection is specified by the Fibre channel standard. If a 16 Gbps port is connected to an
8 Gbps port, the speed slows down at 8 Gbps. If there are 16 Gbps ports on both ends of the link, the
speed runs at 16 Gbps.
SFP/SFP+ transceivers
An SFP transceiver converts electrical data signals into light signals then transfers these signals
transparently via the optical fiber. A transceiver provides bi-directional data links, a laser transmitter (for
fiber optic cables), LC connector, and a metal enclosure to lower the EMI.
Other features of a typical SFP transceiver include a single power supply, low power dissipation, and
hot-swap capability. It is also important that the transceiver you use meets the FC performance and
reliability specifications.
WARNING!
The SFP transceiver has a laser diode featuring a Class 1 laser. To ensure safety, DO
NOT remove any covers or attempt access of the inside of the device. If problems arise or if you need
technical service, contact a qualified personnel.
FC port dust plugs
Each FC port comes with a dust plug. Remove these plugs ONLY when you insert an SFP transceiver.
NOTE:
Contact your vendor for the list of compatible SFP/SFP+ transceivers.
