Infortrend EonStor GSa 3000 Скачать руководство пользователя страница 25

Страница: 25 / 97

Chapter 2:

Hardware installation

2.1

Installation prerequisites

Take note of the following installation prerequisites before you start with the installation:

•

Static-free installation environment

Install the system in a static-free environment to minimize the possibility of ESD (electrostatic

discharge) damage.

•

Component check

Before the installation, ensure that you received all required components by verifying the package

contents with the

Unpacking List

document. This document is included in the package. If there are

items missing and/or damaged, contact your vendor for a replacement.

•

Hard drives

The SAS/SATA drives are purchased separately and must be available before the system

installation.

•

Memory modules

If you want to change the pre-installed DIMM modules, ensure that they are compatible and

purchased from a qualified vendor. Contact your vendor for the list of compatible DIMMs.

•

Cables

All cables that connect the system to the hosts are purchased separately. Contact your vendor for

the list of compatible cables.

•

Rackmount equipment

The rack slide rails are optional accessories. If you need to install it, see section

2.2.2 Installing

the rackmount kit

IMPORTANT!

Install the system first to the rack or cabinet before installing the hard drives into the

system.

Ensure that you are familiar with the exact position of each plug-in module and interface connector. Also,

ensure to handle the cables with care when connecting between systems installed in the rack with a

correct routing paths carefully planned. DO NOT bend or twist the cables as this may cause emission

interference and accidental cable disconnection.

This chapter describes installing the modular components such as hard drives, cards,

and other optional installation or connections such as expansions and rackmount.

Содержание EonStor GSa 3000


































































































Результаты поиска

Содержание EonStor GSa 3000

Отзывы:

Похожие инструкции для EonStor GSa 3000

Бренды по названию

Популярные бренды

Infortrend EonStor GSa 3000, Руководство по оборудованию

Результаты поиска

Содержание EonStor GSa 3000

Отзывы:

Похожие инструкции для EonStor GSa 3000

Бренды по названию

Популярные бренды