EonStor / EonStor DS S12/S16/S24 Series
4
System Maintenance
WARNING
Do not remove a failed component from the system until you have a replacement on
hand. If you remove a failed component without immediate replacement, it will
disrupt the internal airflow.
Qualified engineers who are familiar with the system should be the only ones who
make component replacements.
Whe
e. Forcing or
n inserting a removable module, do not use excessive forc
slamming a module can damage the connector pins either on the module itself or on
the backplane.
The following components can be replaced:
Controller module (please refer to
Replacing the Controller Module
)
Memory module (please refer to
Replacing the Memory Module for
RAID Models
)
CBM module (please refer to
Replacing the CBM for RAID Models
)
PSU module (please refer to
Replacing the Power Supply Module
)
Replacing the Hard Disk Drive
Hard drive (please refer to
)
142
Содержание EonStor DS S12S-J2000-G
Страница 204: ...IFT 9273CSlide32 36 0100 Slide Rail Kit 10 10 Screws on the forearm securing the enclosure onto the rack 204...
Страница 207: ...IFT 9279CSlider36 Slide Rail Kit R 05 05 07 07 07 07 Attach filler plates to the enclosure 207...
Страница 214: ...IFT 9373CSlider36 Slide Rail Kit 03 03 Securing the enclosure with screws in the front and rear forearm area 214...
