Infortrend EonStor CS 3016, Руководство по установке

Страница: 10 / 86

EonStor CS Installation Guide
page 10 / 86
Installation Guide
1-2. Rackmount Installation
Please do the hardware installation device by device , checking single device (node) first. You can proceed
to install another node only if setting up previous one without any problem.
Install rackmount kit (Slide rail kit) on rack and enclosure.

Checking the contents of the slide rail kit

Assembling the slide rail kit
1. Determine the position where to install the enclosure to the front and rear rack posts, then
insert the cage nuts into the designated holes of the front rack posts.
Note! If the rack does not require M5 cage nuts and has its own screw threads, use the M6
or No. 10-32 screws on the front posts.
2. Loosen the four screws on the slide rail (A), adjust its length (B), then secure the slide rail to