inform PYRAMID DSP PREMIUM Series Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 70

inform PYRAMID DSP PREMIUM Series Скачать руководство пользователя страница 13

7

4. UNPACKING AND INSTALLATION OF UPS

Check if the following are provided with the equipment

•

UPS

•

User Manual

•

Test Report

•

Key of the cabin door

•

Battery fuses (three pieces)

4.1. Unpacking and Moving

The procedure is as following:

•

Remove the bands and the protective packaging from the UPS.

•

Use suitable equipment to remove the UPS from the pallet.

•

Mount the cabinet parts supplied with the UPS after positioning and connecting the
UPS.

Equipment and batteries whose packages are damaged during transportation shall be
inspected by qualified Technical Personnel before starting with the installation.

If any equipment has been damaged during shipment, keep the shipping and packing
materials for the carrier or place of purchase and file a claim for shipping damage. If you
discover damage after acceptance, file a claim for concealed damage.

Before the installation, please check if your UPS is customized following your special
requirements (if any).

It is recommended to store the original UPS packaging for future needs.

«
...
11
12
13
14
15
...
»

Содержание PYRAMID DSP PREMIUM Series







































































Отзывы:

Нет отзывов