InfoPrint 6500 DBCS, Руководство пользователя

Страница: 74 / 230

74
Chapter 4
Adapter Parameters Menu
DHCP
You can enable/disable the DHCP protocol using this option, but consult your
administrator for the appropriate setting.
The options include:
•
Disable (default)
•
Enable .
Adapter Parameters Menu
You may enable or disable the Novell or NetBIOS Protocols within this menu,
as well as selecting which Novell Frame scheme to use in processing Novell
signals. See the Novell chapter in the
InfoPrint 6500 Line Matrix Printers:
Ethernet Interface Card User's Manual for more details.
ADAPTER
PARAMETERS
(from page 52)
Novell
Protocol
Enable*
Disable
Auto*
Bindery
NDS
* = Factory Default
Novell
Frame
Ethernet
Speed
Ethernet II
Ethernet 802.3
Ethernet 802.2*
802.2 Snap
Auto Select*
10 Half Duplex
10 Full Duplex
100 Half Duplex
100 Full Duplex
Nest Serv
Type
Keep Alive
Timer
3 Minutes*
2 - 10 Minutes
NetBIOS
Protocol
Enable*
Disable
Job Control
Standard
Enhanced*
Off
ASCII Data
Port Number
9100*
1023 - 65535
Buffer Size
in KBytes
64*
1 - 256
Ethernet
Hotport
Timeout
10 Sec*
10 Sec. - 60 Sec.
To cycle through the menus and its
options, press
MENU then:
To enter a menu or select menu options,
press
ENTER .
To return to a previous menu level,
press
RETURN .
To exit the configuration menus
and return to READY, press START .
Scroll/
Micro Scroll/
Micro
OR