InfoPrint 6500 DBCS, Руководство пользователя

Страница: 172 / 230

172
Chapter 6
Fault Messages
PAP FD DRVR CIR*
SEE USERS MANUAL
No Paper Feed Driver
Circuit. The paper feed
driver circuit on the
controller board is
drawing too much
current. Contact your InfoPrint
service representative.
PRINTER UNDER REMOTE
CONTROL Yes Indicates that remote
management software
has control of the printer. No action required.
READY N/A Printer state message:
printer is online and in
communication with
host. No action required.
RESETTING...PLEASE
WAIT N/A Status message: the
printer finished loading
the program into flash
memory and is
automatically resetting
itself. No action required.
RESTORING BOOT CODE N/A Normal download
initialization message. No action required.
RIBBON INK OUT
CHANGE RIBBON
Yes RibbonMinder has
determined that the
ribbon is out of ink. Replace the ribbon and
verify ribbon life is reset
to 100%.
SECURITY CODE
VIOLATION
No Security Key does not
match emulation. Contact your InfoPrint
service representative.
SECURITY KEY NOT
DETECTED No The security key is not
present or has failed. Contact your InfoPrint
service representative.
SENSOR CALIBRATION
PASSED N/A Status message:
displays when the
Transport calibration is
sucessful. No action required.
SERVICE MENU
<first service test>
N/A Non–error status
message. No action required.
SF ERROR Yes Structured Field Error.
Application software has
violated structured data
field parameters. Not a printer problem.
Have the system
administrator correct
applications data or
configuration.
Table 8: Fault Messages
Fault Message
Operator
Correctable?
Explanation Solution