Infopia GluNEO Lite, Инструкция по эксплуатации

Страница: 10 / 26

• 16 • • 17 •
1.Check the expiration date before performing a control
solution test. Do not use if expired. Please note the
expiration date marked on the control solution bottle.
2.Gently shake the control solution before use.
3.Discard the 1st drop of control solution. This will eliminate
any residue.
Place a drop of control solution liquid on a clean, dry surface
(e.g. the lid of the test strip vial)
4.Dip the test strip into the control solution liquid.
Results will appear in 5 seconds.
Compare the result to the range printed on the test strip
vial. Result should fall within that range.
CAUTION
1. Control solution is for in-vitro diagnostic use only. This means that it is only used for
testing outside the body.
2. Control solution is exclusively made for the GluNEO
®
Lite Blood Glucose Monitoring
System. Do not use other brand control solutions made by other manufacturers.
3. Check the expiration date on the vial. Do not use, if expired.
4. Once opened, use it for the next three months only. Record the discard date on the
control solution bottle. Discard after three months.
5. Do not swallow. This is NOT for human or animal consumption.
6. The control solution bottle icon contains letter ‘C,’ so as not to be confused with the
medication bottle. This will allow you to understand differences between a control
solution test and an actual blood test.
For example only
If you are using the normal control solution, according to this particular vial of strips, your
meter should show a number between 80 and 120.
Please note that the control values shown in the picture are not control ranges.
NOTE
- It is recommended that glucose control solution is stored at room temperature 20~25
℃
(68~77
℉
) before testing.
- Check the expiration date before performing a glucose control solution test.
- Do not use beyond expiration date. Once opened, the control solution expires after 3 months.
If your control solution test falls out of range, please follow the next steps before
contacting customer support:
- Check the expiration dates on all the products you are using. Be sure you are using
GluNEO
®
Lite Control Solution.
- Try another control solution test.
If this test falls out of range, try another control solution test with a new unopened
bottle of test strips.
If you continue to get control soulution test results that fall outside the range, do not
perform a glucose test. Please call customer support in your local area.
H.
N.
L. 255-345
80-120
35-65