September 4, 2012
INFODRAW PMRS-100 User Manual v5.1
160
3-14 SMS Commands To Device:
Commands can be sent to the PMRS unit (SIM Card Number) remotely by SMS. There are 3
orders that can be sent:
1) Restart modem (PPP)
2) Reset device
3) Change Server IP
In order to make these operations happen, follow these instructions:
a.
Remove any SIM card from the PMRS device.
b.
Attach a USB cable to the device and open the “MRS Device Configurator”.
c.
Open the
“SMS”
tab menu.
d.
In the
“Authentication Code”
box, write down a code. You will need to put this code at
the start of each SMS to the PMRS device.
As was said above, there are three options to this feature.
These are the ways to activate each of them by SMS to the device:
1.
Restart PPP:
Authentication_Code restart ppp
For the above device example, the SMS would be:
76D restart ppp
2.
Reset Device:
Authentication_Code reset device
For the above device example, the SMS would be:
76D reset device
3.
Change Server IP:
Authentication_Code New_Server_IP
For the above device example, the SMS would be:
76D mrs2.infodraw.com