July 14, 2013
INFODRAW MRS-400 User Manual v5.4.1
45
4-1-2 Connecting the Unit to the Server:
1)
Insert the SIM card into the MRS-400 Unit.
2)
Ensure the GSM/GPS Antennas are connected to the unit.
3)
Ensure your server (either through the
MRS Service Program Web Admin Server
or
the
MRS Monitor Server Application
) is running and working properly.
4)
If your server is running through the “MRS Service Program”, open the
MRS Monitor
Client
on another PC/ Laptop and connect to the server.
5)
If your server is running through the “MRS Monitor Server Application”, you can
either connect to it using the
MRS Monitor client
on another PC/ Laptop, or you can
view the video streaming in the MRS Monitor Server Application itself.
6)
Turn the MRS-400 device on.
Once you turn the unit on, it
should connect to the server within
1 minute.
All connected units will appear on
the left hand side of the
“MRS
Monitor”
screen under
“Online
Devices”.
Double clicking on the MRS-400
device name, will bring up a
window showing the unit’s ID
number and firmware version.
Press
“OK”
.