Replacing the lens
1.
Remove the top front cover by:
(a) releasing the left and right latches on both sides of the projector,
(b) sliding the top front cover towards the direction of the lens.
2.
Loosen the 4 screws and then lift the lens door.
3.
Remove the lens by:
(a) pushing down the ring handle to release lock,
(b) gently lift the lens.
4. Install the new lens:
(a) gently install the new lens,
(b) pulling up the ring handle to lock lens in place.
5. Replace the lens door by securing the 4 screws.
6. Replace the top front cover by sliding it back.
7. Lock the left and right latches to secure the top front cover in place.
1
3
4
2
IMPORTANT NOTE:
If you need to return your projector for repair, return the projector
with the standard lens which came with your projector, OR attach
the engine dust cover. Do NOT send your optional lens back to
the factory.
