www.infocus.com
Installation
32
Precautions on power cord
Your AC power cord should meet regulations of the country, district where your
projector is used.
Please make sure the type of the power plug is compliant with those given in figure
below. Make sure you are using a valid AC power cord.
In case the included AC power cord does not comply with the AC power socket in
your location, call your dealer for a replacement.
The projector side
Connect to the AC power socket
Connect to power cord connector of
your projector
Connect to AC power socket
Grounding end
Connect the AC power cord
The required standard voltage of your projector is AC 100-240V. It adapts to different
input voltage automatically. Your projector uses a single-phase power cord with neutral
ground cabling.
Do not use any other type of power cords or you may face the risks of electric shock.
In case you have any doubt on the type of power cord you are using, please call your
dealer or service centre for help. Before powering on your projector, get all external
equipment connected in advance.
Note
For safety reasons, unplug the AC power
cord when your projector is not in use. Your
projector will consume a small amount of
power when it is connected to AC power
grid and in standby mode.
Note
Keep your AC power socket close to your
projector for easy plugging and unplugging.
Note
• Use of invalid power cord may hamper product performance or even lead to
electric shock, fire, and other incidents. Always use a compliant power cord
ensure product performance and operation safety.
• The frequently used cables are: AC power cord, VGA cable, audio cable, video
cable, and serial control cable.
Connect included AC power
cord to your projector.