InFocus INF4030, Руководство пользователя

Страница: 14 / 58

Page 12
Insert LightCast key (INF4032 only)
If your monitor did not ship with a LightCast key and you would like to use the LightCast features, you can purchase a LightCast key
(p/n INA-LCKEY1, INA-LCKEY2, or INA-LCKEY3 depending on your region) from InFocus (www.infocusstore.com) or your local dealer.
1) Insert LightCast key into an available USB A port on the side of monitor.
Connect AC power
1) Connect one end of the AC power cord to the POWER IN jack on the back of the monitor.
2) Connect the other end of the AC power cord to an AC outlet.
3) Press the power switch. (The LED on the front of the monitor turns on.)
NOTES:
• Your monitor should only be operated from the power source indicated on the label.
• Always unplug the AC power cord from the power outlet when you are not using your monitor for an extended period of time.
Turn the Monitor On/Off
1) Verify that the power cord is connected to a power outlet. and that the power switch is ON .
2) Press the Power button on the side of monitor.
3) The software interface displays. Begin using.
INF4030
(No LightCast key)
INF4032
(With LightCast key)