Batteries:
The remote uses two (2) AA batteries. Install batteries by removing the cover from the back of the remote, aligning
the + and - ends of the batteries, pushing them into place, and replacing the cover.
Operation:
Point the remote at the projector or at the screen (not at the video source or computer). The maximum operating
distance is 30 feet (9.14m).
Buttons and controls:
Refer to your projector’s reference guide for details on remote functions.
•
Power
- turns the projector on and off
•
Laser
- lights the laser pointer
(CAUTION: Do not stare into the laser beam. Beam is emitted from front of remote)
•
Help
- shows interactive help for common picture and connection problems*
•
Previous, Next
- moves backwards and forwards through your presentation**
•
Mouse control
- moves mouse pointer**
•
Left, Right
- presses mouse buttons**
•
Volume
- adjusts sound level
•
Custom
- can be assigned a special function (older projectors may call this
Effect
instead)
•
Source
- switches between sources
•
Blank
- shows a blank screen instead of the source
•
Presets
- selects stored settings
•
Mute
- mutes sound
•
Auto Image
- resynchronizes the projector to the source
•
Keystone
- adjusts squareness of the image
•
Overscan
- removes noise around the edges of the image
•
Resize
- changes the aspect ratio
•
Source 1, 2, 3
- directly accesses specific sources
•
Menu
- shows the projector’s menu system
•
- navigate menu items and adjust settings
•
Select
- confirm menu choices
•
Backlight
(side of remote) - lights remote buttons
Commander 2 Remote Control
Model: HW-COMMANDER-2
Laser Information
Radiation specification:
• Laser Radiation Class II product; wavelength 650nm; maximum output 1mW
• Remote control complies with applicable requirements of 21 CFR 1040.10
• Remote control complies with applicable requirements of IEC 60825-1:Am 1. 1997
Location of laser beam
warning label on back of
remote:
laser button
(see laser
information)
backlight button
(side of remote)
mouse control
power button
connector for
wired remote
capability
included on some
projectors. Use a
shielded 2.5mm
stereo jumper
cable up to 50
feet long
(15.24m).
Batteries are not
required in the
remote when
cable is
connected.
See other side for warranty and troubleshooting.
*Help, , and keys only function on
supported projectors.
**Presentation and mouse functions
require a USB or DisplayLink
connection between the projector and
computer.
