infobit iShare CX, Руководство пользователя

Страница: 98 / 108

98 / 108
Only when the associated “Release notes” are requiring an additional „ Factory Reset “ , perform it via the
menu “System settings” / “Reset” on websever console menu.
All data of configuration will be lost. So that you do not have to re-configure all data in an elaborate process, therefore note
all settings within the Sub-menus before doing Factory Reset.
5. The update of Base-unit is finished.
Second method to upgrade base unit as below:
Base unit can be upgrade via webserver console menu as below:
Select a “update.img” file to upgrade to target version.
8.3 Upgrading and Pairing of Dongle:
1. Plug the dongle to either of the two USB port of iShare X400 to be updated. It will automatically show up a message to
indicate if the installed firmware of dongle is older, and needs to be upgraded.
Note: Type C dongle needs to plug into Type-C port of front base unit to upgrade.
The upgrading progress starts automatically with the progress bar, as shown below.