Dual-spectrum Network Bullet Camera User Manual
2
⚫
Function of intelligent behavior analysis, such as regional invasion detecting,
boundary violation detecting, entering and leaving area detecting and left items
detecting, etc.
⚫
One-piece shell, with outdoor protection class IP66.
⚫
ONVIF standard interface protocol supported, available SDK, secondary
development and third-party platform connection supported.
2. Operation Guide
2.1 Preparations
1)
The factory default IP address is
：
192.168.1.19.
2)
The subnet mask is 255.255.255.0.The IP address can be changed, for example,
you can change the IP address into 192.168.1.194;the IP address of your
computer should be in the same network segment with your network video
server, and the subnet mask should also be the same, for example, the IP
address can be set as 192.168.1.120.
3)
To test the whether the device is started normally or not. Following the
operation of <Start→run→cmd> on Windows. Open command line window in
which you can input Ping 192.168.1.19. If “Request time out” is not displayed,
then it indicates a normal start.
4)
The OCX files must be installed when visiting the video server for the first
time with Internet Explore.
