
V2109 Series
Dome Controller
Installation/Operation Instructions
This manual applies to below series products:
V2109/V2109X
This manual describes the installation and operation procedures for V2109 series dome controller.
V2109 dome controller can directly control Infinova series super domes and receivers to handle address
switching, PTZ and lens control, preset setting and calling-up, etc.
V2109 communicates with Infinova series super domes and receivers via RS485 or Manchester code
communication protocol. The built-in RS485 generator provides various kinds of baud rates and protocols for
users to select.
LCD displays camera address ID number, the controller status and any number entered from the controller. The
operation is quite easy.