Infinity Interlude IL50, Руководство пользователя

Страница: 5 / 16

1
INTERLUDE
Infinity Interlude Series
The Interlude Series of loudspeakers continues Infinity’s
longstanding commitment to accurate sound reproduction.
Our proprietary Ceramic Metal Matrix Diaphragm
™ (C.M.M.D. ™ )
drivers, precision dividing networks and rigid, well-braced
enclosures combine to deliver uncompromised performance in
any stereo or multichannel home-theater system. In addition,
the IL50 and IL60 incorporate Infinity’s proprietary Bass
Optimization System, which allows you to easily and precisely
fine-tune the speaker’s built-in powered subwoofers for optimum
performance in your listening room. Also, both models are
magnetically shielded for safe placement adjacent to a television.
If you suspect damage from transit, report it immediately to
your dealer. Keep the shipping carton and packing materials
for future use.
Included Accessories . . .
Spikes
Refer to Figure 1 as you perform the following steps:
1. Open each accessory pack and locate the following items:
four feet (with spike/round ends), four locking nuts, four
nylon domes and one wrench.
2. Lay each speaker on its side and locate the four threaded
holes on the bottom.
3. For carpets, screw the round end of a foot into each hole and
hand-tighten a nut onto each one. Leave a minimum of 5/8"
of exposed spike. (On thicker carpets, you can increase the
length of exposed spike up to 1-1/8.") For hard-surface
floors, screw the spike end into each hole instead and leave
5/8" of round end exposed.
4. Carefully flip each speaker upright to sit on its feet.
5. If needed, adjust the feet so each speaker is level and then
tighten each nut with the enclosed wrench. To protect hard
surfaces (e.g., wood floors), slip a nylon dome onto each
round end.
U
NPACKING THE
S
PEAKERS
I
NSTALLING
F
EET
Nylon Dome
(optional for
wood floors)
Locking Nut
HARD-SURFACE
FLOORS
CARPETED
FLOORS
Foot
round end
spike end
Bottom
of Speaker
5 ⁄
8
"
5 ⁄
8
"
min.
1 1 ⁄
8
"
max.
F
IGURE
1
– This cross section shows how to install a foot
onto the bottom of an IL50 or IL60 floorstanding speaker.
Bass Optimization System Adjustment Screwdriver