Infinity Chimp 100 Скачать руководство пользователя страница 194

Страница: 194 / 261

193

Infinity Chimp Series

Loading Options from Default

Cuelist Options may be loaded from the default state by clicking onto the

Load Default

button.

Fig. 163: Load Default Button

Altering Cuelist Options

In order to alter Cuelist settings like Off-Time, Priority, Playback order, etc, you need to open the “Edit

Cuelist” window as described in “Edit Cuelist Window”.

Renumbering all Cues in the Cuelist to whole numbers

You may rename all Cue numbers in a Cuelist to full numbers (1,2,3, etc) by clicking on the

Renumber

button.

Setting the Cuelist Playback Mode

Cuelists may be set to two different modes,

Cuelist

Chase

which may be selected by the appropriate

buttons from within the Edit Cuelist Window.

Chasers offer a reduced functionality and behave differently in some several cases compared to Cuelist.

A Chaser will:

•

Disable Cue Timings such as In/Out Fade and Delay Timings. All timings will be replaced with

global Fade and Snap Timings which are part of the Chaser configuration options.

•

Disable Cue Trigger configuration. Instead global Chaser Trigger Options from the Edit Menu will

be used.

•

Ignore Timecode and Learn Timing Functions and hide Timecode Options for the Cuelist.

•

Enable Chase Master Trigger Selection and Sync Functions

•

Enable Chase Fade and Snap Settings

•

Enable different options for Chase Playback Order

Settings shared between Cuelists and Chases

Tracking

This dropdown menu allows you to enable or disable tracking for this cuelist. You may also enable the

Cuelist to track from the last to the first cue. By default, tracking is set to

Enabled

Priority

The priority setting will change the playback priority as to your setting. The default setting if nothing else is

selected is

LTP

For more information on priorities, please see “Priority Overview”.

The other different priority settings are:

Содержание Chimp 100






































































































































































































































































Результаты поиска

Содержание Chimp 100

Отзывы:

Похожие инструкции для Chimp 100

Бренды по названию

Популярные бренды

Infinity Chimp 100, Руководство пользователя

Результаты поиска

Содержание Chimp 100

Отзывы:

Похожие инструкции для Chimp 100

Бренды по названию

Популярные бренды