Infiniton DHM-W20L, Руководство пользователя

Страница: 8 / 54

Operating methods
Description of functions
Setting of timer off

When the dehumidifier is running, press the [Timer key] to adjust time from 1h
to 24h, pressing the key once to increase the setting time by 1h, after the setting
time exceeds 24h, the figure returns to 1 to start cycle. The Timer key can also
be pressed all the time, the time increases and changes circularly, when the set
time expires, the dehumidifier turns off automatically. After the setting is
completed, if the Timer key does not act at all within 5s, the set time is
confirmed. In timer off state the key lamp on the [Timer key] is normally on.
Setting of timer on

When the dehumidifier is in standby state, the method for adjustment of setting
time by the [Timer key] is the same as timer off. After the setting is completed,
if the Timer key does not act at all within 5s, the set time is confirmed. In timer
on state the key lamp on the [Timer key] is normally on, and the set time is
displayed on control panel.
AUTO mode

Select AUTO dehumidification, if the room humidity is high than the set
humidity or is between +5% or -5% of the set humidity , the compressor will
starts and the fan will run at the set speed. If the room humidity is lower than the
set humidity by -5%, then the compressor will stop but the fan will run at the set
speed. The default set humidity value is 50%.
CONTINUOUS mode

Select CONTINUOUS dehumidification, no matter how the relative humidity in
the room is, the compressor starts, the fan runs at high speed in default, and the
air speed can be regulated via the air speed key.
DRYING function in dehumidifier

Press the [Drying key in dehumidifier] for over 2s to start drying in the
dehumidifier, and the whole drying procedure needs approximate 1h:
1. The dehumidifier starts at HIGH air speed and releases air continuously for
30min;
2. The dehumidifier turns to run at LOW air speed and lasts for 15min;

How to stop:
1. Press the Mode key again for over 2s to cancel drying in dehumidifier, and
recover to the running state before start of drying.
2. Press the [Power key] to stop drying in dehumidifier and recover to the standby
state.
Air-swing function
press the Timer button and the Drying button at the same time for more than 2
seconds to start or end the Air-swing function.
7
WIFI
function
In standby mode, press power key for at least 5s to connect wifi.