InfiniSource ETC 100, Руководство по оборудованию

Страница: 77 / 234

TimeForce II Hardware Guide 65
Using the Model IQ 1000 IntelliClock
Editing and Deleting Existing Messages
Each existing message is listed under the Active Messages section
beneath its corresponding header.
• To edit a message, click on the Message ID . Make the desired
changes in the detail screen and click on the [UPDATE] icon to
save your changes.
• To delete a message, click on the icon to the far right of the
desired message in the list.
How Do I Find the Clock Number and Pass-
word?
The clock ID number and password are stored in the time clock itself.
These settings can be changed from the ClockLink program once you
have connected to the time clock, but you must specify the clock's cur-
rent ID and password before a connection can be made.
Note: The default clock ID is “1.” The default clock password is
“IQ1000.”
The following procedures are performed at the keypad of the clock
itself.
Finding the Clock ID
1. On the clock keypad, press the {MENU} button. The time clock
displays the following:
SELECT MENU FUNCTION
ADMIN PERSONAL
2. There are two grey buttons directly above the numeric keys on the
clock keypad. Press the button located below “ADMIN” on the
clock display.
3. The clock prompts you for your card number. Type in a card num-
ber with administrator-level access rights and press <ENTER>.
Note: The default admin card number is “8888.”
4. The clock prompts you for a PIN. Enter the appropriate password
(based on the card number used) and press <ENTER>.
Note: The default admin password is “1111.”