InfiniSource ETC 100, Руководство по оборудованию

Страница: 30 / 234

18 Infinisource
10. If you would like to assign this clock to a Default Department ,
click on the “No Department” link and make the desired selection
from the tree-directory that appears.
11. If you would like to upload relay events to the time clock, put a
check-mark in the Upload Relay Events field.
Note: Relay Events can only be accessed once the clock profile has
been saved.
12. Select the Time Zone that the clock resides in from the drop-down
menu.
13. Enter any desired Notes about the clock profile.
14. Select the Connection Type from the drop-down menu. The steps
to completing the clock profile vary slightly depending on what
connection type you are using.
• Serial Clock: Select the Com Port that the clock is connected
to from the drop-down menu. Select “Auto Detect” to have the
system automatically determine which port the clock is con-
nected to.
• Modem Clock: In the Phone Number field, enter the phone
number of the line that the clock is connected to. Enter the
number exactly as you would dial it into a telephone, including
any necessary area code or extension numbers. Do not use
dashes or brackets.
Example: A phone number of (800) 555-4855 would be
entered as “18005554855.”
When you have finished entering clock information, click on the
[CREATE] icon to add the time clock profile.
Hardware Installation
Use the following instructions to place your time clock in the desired
location and to establish communications with the clock. Follow the
instructions below that correspond with the type of communication that
your clock uses.
Once you have installed your time clock, refer to page 22 for model-
specific usage instructions.