InfiniSource ETC 100 Скачать руководство пользователя страница 20

Страница: 20 / 234

Infinisource

•

The port that the program listens on is displayed in the

Port

column. This setting is always “5402.”

•

The

Status

column displays the status of the network interface.

While listening, “Waiting” will be displayed in this column.

Add Company

The next step is to add a company to the database that pertains to the
clocks which will be connecting to the server for downloading.

From the main Clock Server menu, click on the “File” drop-down
menu and select

Add/Edit Clocks

Click on the

[ADD COMPANY] icon located in the upper left-

hand corner of the screen. The right-hand section of the screen
opens, allowing you to insert company settings.

Enter your

Company Name

Enter the

Company Code

that all users must specify when logging

into the TimeForce system.

Note:

The company code must be unique for each company in the

application.

Enter the main TimeForce administrator

Username

Enter the

Password

assigned to the main TimeForce administrator.

Enter the path to the

TimeForce Server

. If the server is installed on

the same machine as TimeForce a setting of “http://localhost/” will
suffice.

Enter the

Port

that is used for the TimeForce Punches Service. In

most cases the default setting of “5405” is used.

Click on the [OK] icon to save the company information.

The company information is displayed directly below the row of icons
in the upper left-hand corner of the screen. To delete a company, high-
light the desired company in the list and click on the

[DELETE

COMPANY] icon.

Содержание ETC 100











































































































































































































































Результаты поиска

Содержание ETC 100

Отзывы:

Похожие инструкции для ETC 100

Бренды по названию

Популярные бренды

InfiniSource ETC 100, Руководство по оборудованию

Результаты поиска

Содержание ETC 100

Отзывы:

Похожие инструкции для ETC 100

Бренды по названию

Популярные бренды