Infineon XC2000 Easy Kit, Руководство пользователя

Страница: 17 / 36

XC2000
Easy Kit
Information in Detail
XC2000 series Board Manual 17 V 0.2, 2008-11
3.2 Headers, Connectors and Components
3.2.1 USB Interface
The USB connector is used for connection to a PC. Via the USB it is possible to power
the board, using the USIC0 Channel 0 as serial connection via USB and Debugging via
DAS. For the pinout of USB socket see Figure 6.
Figure 6 On-board header (P201)
3.2.2 CAN1/2 (X107, X108)
On the board are two CAN transceiver connected to the MultiCAN on XC2000 node 0
and 1. The transceivers are connected to two IDC10 plug. For the pinout of IDC10 plug
see Figure 7. You can use a IDC female connector with crimpconnector, flat cable and
SUB-D 9 plug with crimpconnector to have a 1:1 adapter to SUB-D 9.
Figure 7 On-board header (X107,X108)
1 (Vbus) 2 (D-)
3 (D+) 4 (GND)
2
4
6
8
1
3
5
7
9 10
GND
GND
CAN2L
CAN2H
VDDP