Inficon HAPSITE ER, Руководство по эксплуатации

Страница: 110 / 436

10 | Communications and Touch Screen Options INFICON
110 / 436 074-471-P1E HAPSITE ER Operating Manual
10 Communications and Touch Screen
Options
10.1 Communications
HAPSITE ER has two communication options: the cross-over cable and the wireless
connection. The wireless settings will be configured with the laptop at the factory.
Before connecting wirelessly, the wireless radio on HAPSITE ER and the wireless
button on the laptop will have to be enabled. Follow the instructions below to turn on
the radio. Refer to Connecting the Laptop [
}
42] for instructions on attaching the
laptop.
10.1.1 Wireless Range
HAPSITE ER is equipped with an 802.11 b/g wireless adapter. The typical range for a
single is 300 ft. (100 m) with no obstructions. The following may degrade the signal:
• Metal buildings
• Concrete structures
• Electric devices in the area
10.1.2 Turning On the Radio
This procedure gives instructions for turning on the radio, which is necessary for
wireless communication.
DANGER
When the HAPSITE ER radio is on, even if wireless communication is not
being used, a radio signal is being transmitted. The only way to eliminate
the radio signal is to turn the radio off.
1 Open the HAPSITE ER front panel.
2 Remove the cover from the power switch (for the wireless radio). It is located
on the far left side. To remove, unscrew the cover by turning it counter-
clockwise.