manualshive.com logo in svg

Inficon 580-000, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Inficon 580-000 Скачать руководство пользователя страница 9

INFICON

Safety | 2

IRwin-Operating-instructions-mina66en1-15-(1904)

9 / 128

Improper use

• Do not suck liquids into the leak detector.

• Do not suck dirt or sand into the leak detector.

• Do not use the IRwin S in areas with potentially explosive atmospheres.

See also

2

Technical data [

}

 22]

2

EX certification (intrinsic safety) [

}

 24]

2.2 Special conditions for safe use

2.2.1 Intrinsic Safety (Ex protection)

IRwin is certified intrinsically safe to prevent ignition of flammable atmospheres.

IRwin holds an ATEX certificate for EU and corresponding certificates for several other

regions as shown by the attached certificates, see Certificates [

}

 98]).

For details of rating, see EX certification (intrinsic safety) [

}

 24].

The "X" after the respective type certificate number relates to the following special

conditions for safe use:

The only device allowed to be connected to the charging socket on any of the models

• IRwin SX

• IRwin SXT

• IRwin SXG

• IRwin SXGT

is the Ex Certified IRwin Charging adapter (PN 580-604).

The charger or car adapter is subsequently connected to the inlet of the Ex Certified

IRwin Charging Adapter.

This means that the charger for IRwin S must, under no circumstances, be connected

directly to the charging socket on any of IRwin models SX, SXT, SXG, and SXGT. See

also Charging the battery [

}

 35].

IRwin SXnn is certified as intrinsically safe at an ambient temperature of -20 - +50°C.

Further temperature restrictions apply to oxygen and toxic gas measurment of IRwin

SXT and SXGT. See Certified Gas Measurement.

IRwin SXnn is certified for use in Gas groups IIA, IIB and IIC and in Zones 0, 1 and 2.

The external surface of the enclosure is therefore slightly conductive to prevent

electrostatic charging and sparks. Labels added for marking purposes must not be

larger than 400 mm

2

. If larger the instrument should not be used in gas group IIC,

Zone 0 applications. Natural gas applications are not affected by this regulation.

Содержание 580-000

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды