manualshive.com logo in svg

Inficon 580-000, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Inficon 580-000 Скачать руководство пользователя страница 8

2 | Safety

INFICON

8 / 128

IRwin-Operating-instructions-mina66en1-15-(1904)

2 Safety

2.1 Intended use

The IRwin Methane Leak Detector is intended for professional use in residential and

commercial areas. The operation of the equipment requires sufficient knowledge and

experience in gas pipeline inspection. The different IRwin versions are equipped for

the measurement of different gases, see "Technical data [

}

 22]", as well as for the

applications listed below:

• IRwin S

Above ground, Bar hole

• IRwin SX (EX certified)

Above ground, Bar hole, Confined Space, House, Gas Purity, Ex

• IRwin SXT (EX certified)

Above ground, Bar hole, Confined Space, House, Gas Purity, Ex, Ex Tox

• IRwin SXG (EX certified)

Above ground, Bar hole, Confined Space, House, Gas Purity, Ex, GC Ethane

Analysis

• IRwin SXGT (EX certified)

Above ground, Bar hole, Confined Space, House, Gas Purity, Ex, Ex Tox, GC

Ethane Analysis

The IRwin SX, IRwin SXG, IRwin SXT and IRwin SXGT are intrinsically safe and can

be used in areas with potentially explosive atmospheres according to the EX rating

and EX application it is certified for (see "EX certification (intrinsic safety) [

}

 24]").

These models are jointly referred to as IRwin SXnn in the following.

The IRwin S is not EX certified.

Pay attention to the safety instructions "Safe operation [

}

 12]".

• You must assemble, operate and maintain the equipment only in compliance with

these operating instructions.

• Use only within the allowed ambient conditions . Operating or storing the

equipment outside the given range can result in erroneous readings and possible

malfunction.

• Use the leak detector exclusively for the detection of the specified gases.

Содержание 580-000

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды