Inficon 540-200, Перевод оригинальной инструкции по эксплуатации

Страница: 39 / 90

INFICON Operation | 6
T-Guard2_Operating-instructions-jina85en1-13-(2009) 39 / 90
6.3.2 Measurement display elements
The measured leak rates are shown numerically.
The other elements of the measurement view are shown in the following Figure.
1 2 3 4
5 6 7 8 9
Fig. 17: Measurement display elements
1 Selected set of parameters 6 Trigger value
2 Flashing bell: trigger value 1
exceeded
7 Information on helium background
3 Leak rate 8 Bar graph, logarithmic
4 Leak rate unit 9 Warning triangle
5 Operation mode
To 1
Selected set of parameters
The selected set of parameters is displayed in the upper row of the measurement
view. If the set of parameters is subsequently changed, this is illustrated by means of
a small star before the name of the parameter set.
To 7
Information on helium background
The device measures the size of the helium background. The measurement result is
displayed with the “background OK”, “background moderate” and “background bad”
messages.
To 9
Warning triangle
The warning triangle is displayed when there is a message. To call up the message,
select .