infaco Powercoup PW2 EC1700, Инструкция по эксплуатации

Страница: 10 / 20

10
C/
A/ B/
x10 short pulls
x1 long pull
2
1 Start : 2 short pulls of the trigger = ON
Standby output : 2 short pulls of the trigger = ON
2 Normal operations :
1 long pull of the trigger = ON / Releasing the trigger = OFF
1 short pull of the trigger = ON / 1 short pull of the trigger = OFF
Start the machine To enter the set-up mode, do a long pull
on the trigger.
The machine starts automatically at the
fi rst increment on low speed.
Select the requested speed with successive short pulls on the trigger. 10 speed increments
available.
Validate the requested speed and exit the set-up mode with a long pull on the trigger until the
machine stops completely.
The machine is ready to work, the speed will be locked until the next set-up.
The tool is fi tted with an electronic protection system. As soon as the brush becomes blocked
due to meeting strong resistance, the electronic system causes the motor to stop. Restart the
tool by carrying out operation «l» in “Using the Tool” on page 8.
SETTING OF ROTATION SPEED
10 speed increments available between 320 and 1900 r/min
ON
2 (x3)
L/