infaco A3M V2.0, Инструкция по использованию, Страница: 19 / 32

THE TYING HEAD IS STUCK, THE MACHINE NO LONGER OPERATES
Push rod 01, which hits against ring
02 when the wire is cut, sometimes
goes out of its trajectory and be-
come stuck on the outer edge of
ring 02. The arm 03 often remains
locked and can’t open completely
Do not try to force arm 03 open as you
may damage the mechanism.
Bring tying head 01 in to a central
working position, following the arrow
below. Then take hold of ring 02 and
move it forwards and backwards until
the push rod returns to its position be-
neath ring 02.
Ring 02 is released when the push rod has returned to its initial position. The arm 03
must be fully open. Check that the tying head can turn freely again. You can then
switch the machine back on and resume tying operations.
It is normal for the tying head 01 to
resist and make you force it to bring it
back into its operating position.
18 19
01
03
02