Download from driver card/workshop card
17
Fig. TachoReader Combo Plus - inserting a driver card.
If during data retrieval red LED located in the center of the lab el lights up for ab out 4 seconds, and in this
time the device sounds three short b eeps, then it goes off for ab out 2 seconds (repeatedly), this means an
error occurred - refer to the "
" topic.
3. End of data download will be signaled by the device by repeated beeps and flashing LEDs on
the progress bar.
4. Remove the card from the device slot.
5. The data is saved to a file (Surname_First name_Middle name_Date and time of data
download.DDD) placed in the CARD directory in the device memory.
9. Download from driver card inserted in the tachograph
TR Combo Plus can download simultaneously or individually the data from a driver card inserted
in the tachograph and the tachograph data. This depends on the settings described below.
Operations after connecting to a computer:
Open the device configuration window (see: "
" topic for more), and then:
Option I - Downloading data from driver card only
1. For any selected configuration of
,
or
button uncheck all the options.
2. Check one option only: Driver card download via tachograph.
Option II - Simultaneous downloading data from driver card and the tachograph
20
8
