52
Alarm menu
Control how the instrument will behave during alarms and some warnings.
Set for each sensor, the concentration of gas that will cause each possible gas event listed below.
gas present, alert
gas present, low alarm
gas present, high alarm
TWA
STEL
Note:
The navigation will start with the first event setpoint for the
first sensor
; then the second event
setpoint for that same sensor, and so on through the last setpoint for the sensor. The navigation will
then go through the same pattern for the
next sensor
.
Set the TWA time interval for toxic sensor readings.
Permit or prohibit instrument power off during alarms.
Set the on-off functionality for the man-down feature; set the amount of time that will lapse between the
man-down warning and its alarm.
Set the on-off functionality for the proximity alarm. When set to on, the proximity alarm is activated when
the instrument enters an iAssign Beacon
restricted-access area where the Beacon's access level is higher
than that of the current user's access level.
Set the on-off functionality for each option listed below.
audible alarm
vibrating alarm
full-screen alarms
gas-present alert
alarm latch
alarms while docked
Alarm menu
Audible alarm
Vibrating alarm
Alarm latch
Next menu
Go to first
alarm setting
Next setting
Turn on or
off
Next setting
Turn on or
off
Next setting
Turn on or
off