Industrial Scientific DSX-L, Руководство для стартапов

Страница: 117 / 120

113
Figure 6-6. Add Instrument Special Event Page
NOTE: If you select the 30th or 31st as the Day , the event runs on the last day of the month for
months that do not have 30 or 31 days, e.g., the event would run on February 28th.
Step Instruction
9. Enter a name for the event in the Name field.
10. From the Available Instruments field, select the instrument to which the event should
apply, and click Add. You can select multiple instruments by clicking on Add next
to each available instrument you wish to add.
11. The instruments are added to the Instruments Included in Event box. To remove an
instrument from a special event, click on Remove next to each instrument you wish
to remove.
12. Click Save to save the event. The event is added to the list of Special Events in the
contents page.
NOTE: The next time that you view the special event, the Last Journal Log section will be
visible. The Last Journal Log contains records of the last time that the event ran for various
instruments.
6.4. DSX-L Defaults for Scheduled Events
For new DSS installs, the table below shall be the default schedules for all events. For upgrades
to previous versions of DSS, the default schedule is not altered by the installer. For upgrades, all
current event schedules remain unmodified by the installer. See the table below.
Table 6-2. DSX-L Defaults for Scheduled Events
Event Priority Schedule Time Enabled
IDS Settings Read 1 Daily 12:00am Yes