Industrial Scientific DSX-L, Руководство для стартапов

Страница: 114 / 120

110
Step Instruction
8. If you do not want the event to run, click in the checkbox next to the Disabled option.
If the Event is already disabled, you can also enable the event by deselecting the
checkbox next to the Disabled option.
9. Click Save to save the changes to the Event.
Table 6-1. Default Settings for Global Instrument Events
Event Default Settings
Bump Test Interval: Daily
Effective Date: 1/1/03
Run Time: 12:00 AM
Bump Test
(Tango)* Interval: Daily, 24 hours
Effective Date: 4/10/13
Run Time: 12:00 AM
Diagnostics Interval: Daily
Effective Date: 1/1/03
Run Time: 12:00 AM
Calibration Interval: Monthly
Day: 1
st
Effective Date: 1/1/03
Run Time: 12:00 AM
Download Datalog Interval: Upon Docking
Effective Date: 1/1/03
Alarms Interval: Upon Docking
Run Time: After Download Datalog
Effective Date: 1/1/03
Download Manual
Operations Interval: Upon Docking
Run Time: 12:00 AM
Effective Date: 1/1/03
*Setting is disabled by default.
6.3. Special Events
Special Events are custom events that you can assign to specific instruments. If an instrument is
assigned to a Special Event, the Global Event no longer applies to that instrument. You may
wish to setup special events to handle groups of instruments that have special maintenance
requirements. For example, you may have a group of heavily used instruments that you wish to
calibrate weekly instead of monthly, as specified in the global event.