Industrial Scientific DSX-L, Руководство для стартапов

Страница: 104 / 120

100
•
To avoid shorting out an IDS when disconnecting a network cable, first unplug the cable
from the network adapter on the back of the IDS, and then from the network jack. When
reconnecting a network cable to a IDS, first plug the cable into the network jack, and then
into the network adapter on the back of the IDS.
•
To help protect an IDS from sudden, transient increases and decreases in electrical power,
use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).
•
Be sure nothing rests on an IDS’s cables and that the cables are not located where they
can be stepped on, cut, or tripped over.
•
Do not push any objects into the openings of an IDS. Doing so can cause fire or electric
shock by shorting out interior components.
•
Keep IDSs away from radiators and heat sources. Do not block cooling vents. Avoid
placing loose papers underneath an IDS; do not place an IDS in a closed-in wall unit, or
on a bed, sofa, or rug.
•
An IDS is equipped with a fixed-voltage power supply. The IDS will operate at only one
voltage (see the regulatory label on the outside of the IDS for its operating voltage).
5.8.2. Cleaning
Before you clean your IDS, disconnect the power cord from the electrical outlet. Clean your IDS
with a soft cloth dampened with water. Do not use liquid or aerosol cleaners, which may contain
flammable substances. Do not spray water directly onto the unit.
5.8.3 Explanation of Symbols Used on Unit
Symbol Description
Direct Current
Alternating Current
Protective Conductor Terminal
Caution (refer to accompanying documents)