Industrial Scientific DSX-L, Руководство для стартапов

Страница: 102 / 120

98
Step Instruction
3. Press any of the keys on the IDS keypad to access the main menu.
NOTE: The menu cannot be used when the IDS is performing an instrument action.
NOTE: The menu cannot be used if the Menu Locked setting for the IDS in DSSAC is set to
“Yes.”
Step Instruction
4. Use the ARROW keys on the keypad until Instrument is highlighted.
5. Press the ENTER key. The Instrument menu appears.
6. Use the ARROW keys on the keypad to select Clear Datalog. Press the ENTER key.
7. The LCD displays a confirmation prompt: “Are you sure?” Use the ARROW keys
on the keypad to highlight Yes, and then press the ENTER key. If you select No, the
LCD returns to the main menu.
8. The IDS clears the datalog data from the instrument’s memory. The LCD displays
“Clearing Datalog.” The yellow LED is illuminated.
9. When the datalog data has been cleared, the LCD returns to the main menu, and the
green LED is illuminated.
5.7. IDS Diagnostics
You can manually run a pressure diagnostics test for an IDS using the menu on the IDS LCD
display as described below.
Step Instruction
1. Press any of the keys on the IDS keypad to access the main menu.
NOTE: The menu cannot be used if the Menu Locked setting for the IDS in DSSAC is set to
“Yes.”