Indu-Sol PROmesh P9+, Руководство пользователя, Страница: 33 / 49

Web application
PROmesh P9+
– User Manual
33
o
Broadcast & multicasts: The set limits apply to all broadcast and multicast packets (to all
or multiple devices on the network).
o
Broadcast, multicast & unknown unicasts: The limits apply to all broadcast, multicast, and
unknown unicast packets (to one subscriber).

Limit of incoming packets: Select the effective ingress rate of the port. Possible are 128 kbit/s,
256 kbit/s, 512 kbit/s, 1 Mbit/s, 2 bBit/s, 4 Mbit/s, and 8 Mbit/s. “No limit” is defined as the default
value.

Outgoing packet limit: The data rates for outgoing packets refer to all packet types. Select the
effective egress rate of the port. Possible are 128 kbit/s, 256 kbit/s, 512 kbit/s, 1 Mbit/s, 2 Mbit/s,
4 Mbit/s and 8 Mbit/s. “No limit” is defined as the default value.
After you
have made the desired settings, click “Apply” to save them.
Link aggregation
Using the link aggregation function, several physical connections can be combined into one logical
connection. This way, you can transfer greater amounts of data between 2 devices. (If you combine 2
physical connections between 2 PROmesh P9+ by means of link aggregation, then instead of 1 x 1Gbit/s
up to 2x 1Gbit/s can be transmitted)
Link aggregation can be static or dynamic.
Static
You can add a new link aggregation group via
the “+” button. Then you can:

Group ID: Each link aggregation group has an ID (1-14)

Type: Specifies whether static or dynamic link aggregation is used

Ports: Here you can select the physical ports that should belong to a link aggregation group (a
logical connection).
With the “Apply” button, the settings can be accepted and applied.
Dynamic (LACP)
This menu lets you decide whether LACP is executed dynamically, statically, or not at all.
The following settings are required for this:

Type: Select whether LACP is to be executed dynamically, statically, or not at all.