Indu-Sol PROmesh P9+, Руководство пользователя, Страница: 32 / 49

Web application
PROmesh P9+
– User Manual
32

The management VLAN: The switch itself can be reached via the management VLAN. If the switch is
parameterized in a PROFINET controller, an EtherNet/IP scanner or another management software,
then it must be ensured that the management VLAN is located in the same VLAN as the
scanner/controller/software.

VLAN can be deactivated/activated: By default, VLAN is disabled. This causes the switch to operate in
the Transparent mode. If VLAN is activated then the switch works in the Bridge mode.
Figure 16: VLAN Configuration
Bandwidth control
Bandwidth control makes it possible to enforce bandwidth limits on a port. You can set different send and
receive rates for each port (incoming/outgoing packets) and apply them to specific packet types.
The tabular overview offers the following settings:

ID: Specifies the port number, also marked on the housing.

Packet type: Select a packet type to filter by.
o
All: The specified limits are observed for all packets transported via the port.
o
Broadcasts: The set limits apply to all broadcast packets (to all devices in the network).