Plush Lounge
Corner Table Ganging Assembly Instructions
1
2
Start by laying the chairs that are going to be ganged
to the table on their back.
Attach the metal ganging plates to the chair, as
shown, with the smaller slots on the chair side. Use
the 1-1/2” long bolts to attach the plate to the chair.
Do not fully tighten the bolts yet. Leave them
loose for final adjustments.
800-422-5727
www.IndianaFurniture.com
Proper product assembly is the responsibility of the installing agent. If you have any questions concerning these instructions, please contact Customer Service.
Page 1 of 4
Ganging:
Note: Images shown are for clarity purposes only and may not match the unit that you are currently ganging together.
Position the table next to the first chair to be
ganged.
Note: Make sure the insert nuts for the second chair
are oriented in the correct direction for the desired
layout.
Note: These instructions only apply to 620-3333CGT & 620-
3333CGTT.
Second Chair to
gang to this side
