Index MS16-6 Скачать руководство пользователя страница 65

Страница: 65 / 82

CM180

- Checking the window pane

Orientation

If the window pane shows damage in the form of cracks or severe deterioration, it

must be replaced regardless of the information on the safety label. Initiate follow-up

activities such as ordering and schedule the replacement with the customer.

Requirement

Example: Window pane label 2006

Year of manufacture

Protection class and EN standard

Manufacturer

INDEX part number

Check the inspection label: year of manufacture, resistance class,

manufacturer (logo) of the window pane, INDEX part no.

Procedure

Danger

Workpieces forcefully expelled from the workpiece

clamping device or chips resulting from cutting operation

are not held back by the destroyed pane.
Injury to the operating personnel, property damage, and

damage to the machine.

Continuous checking of the window pane and timely

replacement – see the customer’s service, inspection and

maintenance schedules/logs.

Check window pane for damage.

2. Check tightness of sliding door with window pane. Check all the seals for

damage/wear.

3. Check safety label and note replacement date.

4. Log any damage and order a new window pane, and schedule replacement

with the customer.

Maintenance Summary - 2.000 Operating hours

Maintenance Instructions

MS32-6.2

DIM012EN - 03.06.2020

Содержание MS16-6



















































































Результаты поиска

Содержание MS16-6

Отзывы:

Index MS16-6, Руководство по эксплуатации, Страница: 65 / 82

Результаты поиска

Содержание MS16-6

Отзывы: