manualshive.com logo in svg

Index MS16-6, Руководство по эксплуатации, Страница: 62 / 82

Поделиться
Скачать
Index MS16-6 Скачать руководство пользователя страница 62

CM140

 - Inspection of the pneumatic system

Orientation

Operating fluids such as hydraulic fluids, cooling lubricants, lubricating greases/oils 

are also subject to degradation or aging as the components involved in this process, 

and must therefore be serviced, refilled or replaced at regular intervals.

To ensure trouble-free operation, periodic checks of the pneumatic system are 

necessary.

- Check pressure setting on pressure gauge.

- Check fluid lines.

- Check silencers.

- Drain off condensate.

- Check filters, replace if necessary.

Example: Pneumatic maintenance unit by Festo

a

Filter regulating valve (factory set to 6 bar)

b

Branch module

b’

Branch fire shutter

c

Switch-on valve (electrically operated) with silencer

 (*)

.

d

Branch module with pressure monitoring (factory set to min. 4.0 bar)

e

High-precision pressure regulating valve (factory set to 0.3 bar)

f

Pressure sensor

g

Suction pump switching valve

h

Throttle for fire protection sensor

( * ) Check by manually pushing (using a ballpoint pen or similar) the blue button of 

the switch-on valve (manual auxiliary operation).

Maintenance Summary - 2.000 Operating hours

58

Maintenance Instructions

MS32-6.2

DIM012EN - 03.06.2020

Содержание MS16-6



















































































Отзывы:

Нет отзывов